Suitable for all types of flooring and different applications
Perfect for any situation where a new screed or concrete is going to be laid
Strong design & flexible to install
Highly reliable and resistant to high temperatures
Installation does not require a perfectly flat floor surface
Available in 4 power outputs, each in different lengths
Individidual effect per m² according the rooms degree of insulations
Made in Denmark
A robust universal and cost-effective cable which is suitable for providing comfort heating or primary heating of the room beneath any floor covering. The cable is robust and suitable for fastening on reinforcement grids and embedding in concrete, which makes it a perfect solution for new builds or renovation projects where a new screed will be laid.
The 6 mm heating cable range (10, 14, 18, 20 W/m) is designed with a strong outer sheath that makes it suitable for fastening on wire reinforcement and embedding in concrete layers.
When the heating cable is fully embedded, it warms the screed above and around it, building up heat in the floor which is slowly released into the room, providing a very stable temperature. Heating cables are a flexible solution that allows you to adjust the power output per m² according to your individual need. The power output varies according to the cable spacing, which is referred to as the centre-to-centre distance. The smaller the distance between heating cables the more power output and vice versa.
The cable is dual conductor construction with earth screen and drain wire.
Available in many sizes suitable for a wide range of applications.
6 mm 10 W/m
Suitable for low-built underfloor heating. The cable is installed in a minimum 10 mm thick layer onto an existing, stable construction. Another common area of application of 6 mm 10 W/m is installation beneath wooden floors on joists. The heating cable is installed on mesh netting, which is mounted between joists beneath wooden floors.
6 mm 14 W/m
Suitable for low-built underfloor heating. The cable is installed in a minimum 10 mm thick layer onto an existing, stable construction.
6 mm 18 W/m
suitable for embedment in a self-supported concrete layer or screed with or without reinforcement grid in a minimum 30 mm thick mould layer.
6 mm 20 W/m
Suitable for embedment in a self-supported concrete layer or screed with or without reinforcement grid in a minimum 30 mm thick layer.