Home » Products » Frost protection » Frost protection of pipes » Pipeheat Plus – 11 W/m

Pipeheat Plus – 11 W/m

 Self-limiting heating cable – 11 W/m

PipeheatPlus is a self-regulating heating cable designed to provide effective frost protection for pipes. The cable’s self-regulating matrix lowers the nominal power of the cable as the temperature rises and, conversely increases the nominal power at falling temperatures. The cable can be fitted on the outside of pipes as traditional frost protection but also inside pipes and drains. When installing on the surface of plastic pipes aluminum tape is applied on the entire length of the pipe. This will ensure good heat dissipation from the cable. The product has a built in thermostat that turns on when the temperature drops below 3 °C and turns off when the temperature rises above 13 °C. The cable meets the requirements of IEC / EN 62395 for frost protection in private homes and industry.

• Built-in thermostat
• Can be mounted externally on pipes or internally in pipes
• Enables continuous water supply during periods of severe frost
• Prevents frost damage to water pipes
• Easy installation
• Self-regulating property contributes to cost-effective operation
• 5-year warranty

APPLICATION

• Inside Pipes
• Outside pipes
• Valves
• Sprinkler

TILBEHØR

• Aluminium tape
• Brass fitting / nipple

LENGTHS

• 1 – 50 m

SPECIFICATIONS

• Nominal Power – 11 W/m @10 °C
• Supply voltage – 230 V
• Cable dimensions – 8 mm x 5 mm (+/- 0,5 mm)
• Conductor insulation – Polyolefin
• Conductor dimension – 2 x 0.56 mm²
• Earthing – Aluminium Mylar tape with copper conductor
• Heating cable, outher sheath – Polyolefin, special
• Colour – Purple, RAL 4005
• Cold cable – 2 m with plug
• Cold cable type – 3G H05RN-F
• Permissible cable temperature – Max. 65°C (85°C unpowered)
• Min. bending radius – 30 mm along the thin side
• Warranty – 5 years
• Minimum installation temperature – -15 °C
• Approval – CE
• Standard – IEC/EN 62395
• Tolerance power @ 10°C – -10 %…+20 %