Home » Products » Snow & ice melting » Roofs, Gutters & Drainpipes » GUTTER HEAT – 25 W/m

GUTTER HEAT – 25 W/m

Self-limiting heating cable – 25 W/m

Snow and ice melting on roofs and in gutters

Gutter Heat is designed for frost protection of gutters and downpipes but can also be used on the roof. If the heating cable is installed in a downpipe, it is typically fixed to a chain, hanging from a strain relief at the top of the downpipe.

Gutter Heat is a self-regulating heating cable with an output of 25 W/m, supplied complete with a factory-fitted plug and ready for on-site installation. The cable is equipped with a 2-meter neoprene connection cable and a molded plug.

The built-in thermostat ensures that the product is activated when the temperature drops below 3°C and switches off again when thetemperature rises above 13°C

APPLICATION

• Gutters
• Downpipes
• Roofs

ACCESSORIES

• Thermostat
• Cable clips for gutters
• Spacer clips
• Chain
• Crossbar
• Edge protector

LENGTHS

• 2,5 – 50 m

POWER

• 60 – 1250 W

SPECIFICATIONS

•  Nominal power – 25 W/m @10 °C
• Supply voltage – 230 V
• Cable dimension (BxH) – 10,5 mm x 5 mm (+/-0,5 mm)
• Conductor insulation – Polyolefine
• Bus conductor – 2 x 1,0 mm²
• Earthing – Aluminium mylar foil and copper conductor
• Cable outer sheath – Polyolefine, UV stable
• Colour – Black, RAL 9005
• Thermostat – Bi-metal, ON 3 °C / OFF 13 °C
• Supply cable – H05RN-F, 2 m
• Permissible cable temperature – Max. 65 °C (85 °C unpowered)
• Min. bending radius – 30 mm, across surface (B)
• Warranty – 5 years
• Min. installation temperature – -15 °C
• Standards – IEC/EN 62395
• Tolerance effect @10 °C – -10 %…+20 %