With its compact dimensions, this serial resistive heating cable can easily be installed inside pipes as well as outside of pipes.
The special outer sheath is made from a material approved for drinking water, and the power is adapted to cover most frost protection needs.
Once the cable has been installed, terminate with suitable insulation. It is recommended that the cable be controlled by means of a thermostat with a sensor mounted under the insulation. See HC200 Thermostat
1 – 40 m
Nominal Power – 10 W/m
Supply voltage – 230 V
Heating cable dimensions – 4.5 mm x 6.5 mm
Conductor insulation – Fluoropolymer
Earthing – Aluminium Mylar tape with copper conductor