Home » Products » Frost protection » Frost protection of pipes » PLUGIN – 11 W/m
PLUGIN – 11 W/m
Self-limiting heating cable – 11 W/m
- Plug & Play
- Can be fitted on the outside and inside of pipes
- Enables continuous water supply during periods of severe frost
- Prevents pipes from freezing
- Approved for installation in drinking water
- Self-regulation feature contributes to cost-effective operation
- 5-year warranty
Plug In is a self-regulating/limiting heating cable designed to provide effective frost protection for pipes. The cable’s self-regulating matrix lowers the power consumption of the cable as the temperature rises and, conversely, raises the power consumption at low temperatures.
The cable can be fitted on the outside of pipes as traditional frost protection but also inside pipes with drinking water. When installing on the outside of plastic pipes, it is advantageous to apply aluminium tape along the entire length of the pipe. This will ensure good heat distribution. The cable meets the requirements of IEC / EN 62395 for frost protection in private homes and industry.
It is recommended that the cable be controlled by means of a thermostat with a sensor mounted under the insulation. See HC200 Thermostat
APPLICATION
- Inside Pipes
- Outside pipes
- Valves
- Sprinkler
TILBEHØR
- Aluminium tape
- Thermostat
- Brass fitting / nipple
LENGTHS
SPECIFICATIONS
- Nominal Power – 11 W/m @10 °C
- Supply voltage – 230 V
- Cable dimensions – 10.5 mm x 5 mm (+/- 0.5 mm)
- Conductor insulation – Polyolefin
- Conductor dimension – 2 x 0.56 mm²
- Earthing – Aluminium Mylar tape with copper conductor
- Heating cable, outher sheath – Polyolefin, special
- Colour – Purple, RAL 4005
- Cold cable – 2 m with plug
- Cold cable type – 3G H05RN-F
- Permissible cable temperature – Max. 65°C (85°C unpowered)
- Min. bending radius – 30 mm along the thin side
- Warranty – 5 years
- Minimum installation temperature – -15 °C
- Approval – CE
- Standard – IEC/EN 62395
- Tolerance power @ 10°C – -10 %…+20 %